Skip to Content
ITC-Audio

ITC-Audio T-6708 IP Network Adapter

ITC-Audio T-6708 IP network adapter, is a revolutionary wall mountable IP adapter which can convert analog based amplifiers into IP based amplifier.

  • Genuine product with manufacturer warranty
  • Installation and training by our engineers
  • After-sales support across Pakistan

Overview

ITC-Audio T-6708 is a wall-mountable IP adapter that can extend an analog amplifier’s capacity to operate and transmit voice signals over a LAN/ WAN network. The IP adapter can be installed anywhere on the LAN network allowing point-to-point & multi-point communication between various nodes ( if multiple ITC-Audio T-6708 have been installed over the LAN Networks). The speaker is directly connected to the amplifier, which is further connected to the ITC-Audio T-6708 network IP adapter.

Features
IP network audio adapter or decoder to work with an external power amplifier. Direct to receive internet audio source to decode into the analog source as IP mixer preamplifier. Non-dedicated network system solution. It could be installed anywhere on the LAN network. Economy network audio solution for multiple small-sized room applications. Zone definition is done through software; each network audio adapter could be regarded as one zone, or several audio adapters could be taken as one zone, moreover, several zones could be defined as groups for synchronous operation. Build-in order programmed collect module, it can realize the real-time signal contains function.

Connection Diagram

ITC-Audio T-6708 is directly connected to any conventional amplifier and is further connected to the LAN network. This allows the user to reach out for the amplifier via a local IP network, Multiple amplifiers on an IP network can be used as IP intercoms or for broadcast via IP microphone ( Model: ITC-T6702)

Features

Features
IP network audio adapter or decoder to work with external power amplifier.
Direct to receive internet audio source to decode into analog source as IP mixer pre amplifier.
Non-dedicated network system solution.
Could be installed anywhere of the LAN network.
Economy network audio solution for multiple small sized room applications.
Zone definition is done through software, each network audio adapter could be regard as one zone,or several audio adapters could be taken as one zone, moreover, several zones could be defined as group for synchronous operation.
Build-in order programmed collect module, it can realize the real time signal collect function

Specifications

Product ModelT-6708
Working Temp5℃~40℃
Audio Output Impedance470Ω
S/N Ratio>70dB
Audio Output Level1000mV industry standard pressure line terminals
T.H.D≤0.3%
Output Frequency80Hz~16KHz
Sampling Rate8K~48KHz
Transfer Rate100Mbps
Audio ModeMP3/MP2
Communication ProtocolTCP/IP, UDP, IGMP (multicast)
Power Consumption≤8W
Network InputStandard RJ45 Input
Humidity20%~80% Relative humidity, without condensation
Power Supply~220V-240V 50/60Hz
Dimensions187 x 139 x 60mm
Weight1.36Kg

Planning a conference room, hall or classroom?

Tell us about the room and how it will be used. Our engineers will recommend the right equipment, visit the site if needed and send you a quotation.